CUMMINS N14 Specifiche Scaricare il pdf (Pagina 116)

100

101

Caution: Do not use lubricating oil on the o-ring. The

o-ring will increase in size when in contact with lubri-

cating oil. Use vegetable oil to lubricate the o-ring.

Lubricate the o-ring with vegetable oil, and install the

support bearing into the gear cover. Tighten the cap-

screws.

Torque Value: 27 N•m [20 ft-lb]

Accessory Drive Seal - Installation

Install the oil seal on the fuel pump drive oil seal mandrel,

Part No. ST-1173, with the closed or part number side

facing the driver.

NOTE: Do not use any kind of lubricant to install the seal.

The oil seal must be installed with the lip of the seal and the

seal wear area of the accessory drive pulley clean and dry.

Use of lubricant will result in oil leakage at the seal.

Put the fuel pump drive oil seal mandrel, Part No. ST-

1173, over the accessory drive shaft.

Align the keyway in the driver with the groove pin in the

accessory drive shaft.

Push the seal into the seal bore until the seal driver

contacts the gear cover.

Accessory Drive Seal - Installation Engine Assembly (00-02)

N14Page 0-96

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 586 587

Commenti su questo manuale

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifiche Pagina 116

Commenti su questo manuale